OBD-MB-RC15
Rear view camera input activator Crafter/Sprinter W906 Audio15 1x
General
This interface enables the possibility to switch over to the camera input on all levels (radio – CD – navigation – SD) of the Audio 15 unit when the reverse gear of the car will be selected. The set also includes a camera input cable for the connection of an aftermarket camera.
This interface enables the possibility to switch over to the camera input on all levels (radio – CD – navigation – SD) of the Audio 15 unit when the reverse gear of the car will be selected. The set also includes a camera input cable for the connection of an aftermarket camera.
Features
# Programmed in a few seconds
# Programmed in a few seconds
# Plug and play
# Full switch over of the radio unit when the reverse gear is selected
# Full switch over of the radio unit when the reverse gear is selected
# Complete with camera input cable (fakra to RCA)
The following is provided in the set
- NavInc OBD Interface OBD-MB-RC15
The following is provided in the set
- NavInc OBD Interface OBD-MB-RC15
- 1x camera input cable
- Installation manual
- Warranty
- Invoice
Additional Information
- The connected camera must support NTSC video signals
- Interface must be combined with an aftermarket camera or OEM camera system
- For only one vehicle, after the programming process the interface stores a unique code of the car. This makes the module unusable for other cars.
Product specifications
Voltage supply: 12V DC
Voltage-operating capacity: 10,5 – 14,8V
Operating current: 48mA
Power input: 0,70W
Temperature range: - 30°C up to + 80°C
Weight: 42grs
Dimensions(W x H x D): 22 x 72 x 50mm
- Installation manual
- Warranty
- Invoice
Additional Information
- The connected camera must support NTSC video signals
- Interface must be combined with an aftermarket camera or OEM camera system
- For only one vehicle, after the programming process the interface stores a unique code of the car. This makes the module unusable for other cars.
Product specifications
Voltage supply: 12V DC
Voltage-operating capacity: 10,5 – 14,8V
Operating current: 48mA
Power input: 0,70W
Temperature range: - 30°C up to + 80°C
Weight: 42grs
Dimensions(W x H x D): 22 x 72 x 50mm
Not available
Car models:
The interface is suitable for the following models:
Mercedes
| Sprinter (W906) | 2012-2018 | Audio 15 (with or without Becker Map Pilot) |
Volkswagen
| Crafter | 2014-2017 | Audio 15 (with or without Becker Map Pilot) |
Remarks:
- Only in combination with Audio 15 (Code EN7) with or without Becker MAP PILOT
- Not in combination with electrical preinstallation for reversing aid (Code FR7)
- Only compatible with NTSC camera systems
- Only 1x activation possible.
Image of Audio 15 unit:
