General
The NavInc interfaces allow for connecting video sources to the original navigation system of Lexus.
The interface ensures that an input is created on the original navigation system, on which various external video sources can be connected (e.g. DVD player, DVB-T TV, iPod, reversing camera, external navigation systems, etc.). The images will be displayed on the navigation screen. The audio of the video sources must be submitted via an AUX input or FM modulator.
The interface ensures that an input is created on the original navigation system, on which various external video sources can be connected (e.g. DVD player, DVB-T TV, iPod, reversing camera, external navigation systems, etc.). The images will be displayed on the navigation screen. The audio of the video sources must be submitted via an AUX input or FM modulator.
If multiple audio / video sources are connected to the audio input you can switch to audio via the "Audio Select" option.
It is possible to switch between the different video sources via the included button and/or remote control.
The interface is equipped with external connections:
- Camera input; for the connection or reversing camera with automatic activation
- Video output; for the sending the video images to head rest monitors or roof monitor.
Besides the interface creates an audio select +12V signal on every video input. This means:
If Video input (V1) is selected, then on the audio select cable of V1 will be a +12V signal. The audio select cable of V1 needs to be connected with the DVD player or DVB-T tuner. This in order to switch on the devices when Video input 1 (V1) is selected. As Video input 2 (V2) is selected, the source on V1 will be switched off and the source on V2 will be switched on. This enables also to switch the audio.

Features
- RGB input (Connecting external navigation system)
- 2x Audio/Video input (connect video sources, TV / DVD / iPod)
- Camera input (connecting reversing camera)
- Video output (connect headrest screens)
- NTSC support
- Audio select output (audio/video selection port)
- Image retention while driving
- CE-approved
- Video output (connect headrest screens)
- NTSC support
- Audio select output (audio/video selection port)
- Image retention while driving
- CE-approved

The following is provided in the set:
- NavInc AV-Interface
- Cable set
- Installation- and user manual
- Warranty
- Invoice
Additional information:
- Check at the tab “compatibility” on top of this page if your radio or navigation system is suitable for this product.
- The connected video sources must support NTSC video signals.
- Audio of the connected video source must be linked to the AUX input of car, FM modulator, USB or iPod interface.
- No constant voltage needed (+30) therefore the interface is much more stable.
- The connected video sources must support NTSC video signals.
- Audio of the connected video source must be linked to the AUX input of car, FM modulator, USB or iPod interface.
- No constant voltage needed (+30) therefore the interface is much more stable.
- Mute function for the not used video inputs.
- Use of a metal casing and new components (not Chinese or remanufactured components).
- Use of a metal casing and new components (not Chinese or remanufactured components).
Product specifications
Voltage: 12V – 24V DC
Voltage-operating capacity: 8 – 18V DC
Standby current: 0 mA
Operating current: 5 Watt max.
Power input: 12V
Temperature range: - 30°C up to + 80°C
Weight: 250grs
Dimensions(W x H x D): 130 x 20 x 102mm
Legal information:
The driver ofthe vehicle should not be inferred from the motion images. In many countries, watching movies while driving is prohibited. Therefore we accept no responsibility for material or personal injuries, directly or indirectly, due to installation of the interface modules.
Interface and Software basic information:
The NavInc interfaces are no navigation systems or screens to replace the navigation system. The NavInc interfaces enable the possibilities to connect different Audio/Video sources to the navigation system.
The NavInc interfaces are no navigation systems or screens to replace the navigation system. The NavInc interfaces enable the possibilities to connect different Audio/Video sources to the navigation system.
Manufacturers create adjusted software and hardware versions, options and enhancements which ensures that the compatibility of the products cannot be guaranteed 100%. Compatibility lists are based on customer feedback and experiences and will constantly be updated for optimal customer support.
ES (10-pins)
1999-2003
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
GS
1999-2001
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
GS (10-pins)
2001-2005
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
GX (10-pins)
2003-2006
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
IS (10-pins)
1999-2004
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
LS
1998-2000
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
LS (10-pins)
1999-2006
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
LX (10-pins)
1998-2002
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
LX (10-pins)
2003-2007
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
RX
1999-2003
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
RX (10-pins)
2004-2006
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
SC
2002-2010
- Note: Need to solder RGB wires (in/out) - only switch at navigation level
- Open head-unit
- Head-unit
RGB navigationsystem - Touch support
Glass - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
Avensus
2003-2006
- Open head-unit
- Head-unit
Color CD navigation systems - Touch support
No - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
Avensus
2007-2009
- Open head-unit
- Head-unit
Color CD navigation systems - Touch support
No - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
Corolla
2004-2007
- Open head-unit
- Head-unit
Color CD navigation systems - Touch support
No - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
Land Cruiser
2002-2007
- Open head-unit
- Head-unit
Color CD navigation systems - Touch support
No - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
Prius
2001-2005
- Open head-unit
- Head-unit
Color CD navigation systems - Touch support
No - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
RAV4
2000-2007
- Open head-unit
- Head-unit
Color CD navigation systems - Touch support
No - R-gear select
Lamp - iPAS lines
- Picture in Picture (PiP)
- I-DRV
- Guide lines
- CVBS signal
NTSC - Rear camera input
- Signal
RGB - UNI - Activation
Switch - A/V output
- A/V input
- HDMI input
- LVDS input
- RGB input
- Front camera input
Compatible for the following models
Lexus
ES (10-pins) | 1999-2003 | RGB navigationsystem |
GS | 1999-2001 | RGB navigationsystem |
GS (10-pins) | 2001-2005 | RGB navigationsystem |
GX (10-pins) | 2003-2006 | RGB navigationsystem |
IS (10-pins) | 1999-2004 | RGB navigationsystem |
LS | 1998-2000 | RGB navigationsystem |
LS (10-pins) | 1999-2006 | RGB navigationsystem |
LX (10-pins) | 1998-2002 | RGB navigationsystem |
LX (10-pins) | 2003-2007 | RGB navigationsystem |
RX | 1999-2003 | RGB navigationsystem |
RX (10-pins) | 2004-2006 | RGB navigationsystem |
SC | 2002-2010 | RGB navigationsystem |
*Only switch on navigation level |
Remarks:
- Only in combination with original Lexus RGB navigation system.
- Installation also possible in combination with original TV tuner.
- Installation on the RGB cable with universal connector.
- Automatic switching to camera on navigation level.
- The connected video sources must support NTSC video signals.
- Audio of the connected video source must be linked to the AUX input of car, FM modulator, USB or iPod interface.
- Installation of the interface behind the navigation computer.
- Audio of the connected video source must be linked to the AUX input of car, FM modulator, USB or iPod interface.
- Installation of the interface behind the navigation computer.
Image of suitable navigation systems:
ES

GS 1999

GS

GX

IS

LS 1999


LS 2000

LX 1998

LX 2003

RX 1999

RX 2004

SC 2002
