SW interface; CAN-BUS, K-bus & Resistive protocols to analog (CX-CO-DUAL) [duplicated]

CX-CO-DUAL

Consumer?

Find the nearest store or webshop.

Where to buy

Business customer?

Register for exclusive access to our full assortment and pricing.

Register
Product Datasheet

General
Many original radio- or navigation systems are CAN-BUS, K-bus or resistive controlled. When the original radio- or navigation system is replaced by an aftermarket radio- or navigation system (e.g.; Kenwood, Alpine or Pioneer systems), the signals such as positive ignition output, reverse gear signal, steering wheel controls, etc. cannot be used anymore.
 
The NavInc steering wheel interface enables to convert the CAN-BUS, K-bus or resistive signals to usable analogue signals. Because of the interface the original functions of the vehicle keep working in combination with an aftermarket radio- or navigation system, such as;
-Steering wheel controls
-Parking sensors
-Original amplifier / sound system
-Controls of the info display via the aftermarket radio
 
Also other digital signals of the car can be converted to analogue signals, so the aftermarket radio- or navigation systems can make use of these signals as well, such as;
-Light output
-Positive ignition output
-Handbrake output
-Speed pulse output
-Reverse gear output
 
The interface is suitable for over 200 different car models and 20 aftermarket radio- and navigation system manufacturers. The interface is compatible with the following protocols: CAN-BUS, K-BUS and Resistive. Besides also Plug and Play cable kits are available for an easy installation without damaging the original wiring of the vehicle.
 
See tab "Downloads" for the complete compatibility list or see this link:
 
An overview of the different functionalities:
 
Steering Wheel Controls
The interface makes sure the original steering wheel controls functionality maintains the same in combination with the right control cable (optional).
 
The following functionalities are possible:
Skip songs
Volume control
Play/Pause
Source option (switch between FM-AM-CD-iPod-etc.)
Mute
Up / Down menu buttons
Telephone answer/deny
 
For specific functionalities check tab “Compatibility”.
  
 
P&P cables
At the bottom of the page you can select the following:
- Universal cable kit
- Plug & play cable kits
- No cable kit
 
CAN-BUS
The interface has self learning profile selection in car models with CAN-BUS and K-bus controls.
 
Positive ignition output
The interface reads out the ignition output from the CAN-BUS or K-bus protocol and converts it to a usable analogue +12V output signal (maximum 2A). With this signal the aftermarket radio- or navigation system switches on and off automatically when the ignition will be switched on or off.
 
Light output
The interface reads out the light signal output from the CAN-BUS or K-bus protocol and converts it to a usable analogue +12V output signal (maximum 0.04A). With this signal the aftermarket radio- or navigation system switches to night view (colours) automatically when the lights will be switched on.
 
Speed pulse signal
The interface reads out the speed pulse signal from the CAN-BUS or K-bus protocol and converts it to an usable analogue speed signal (km/h or Miles).
 
Reverse gear signal
The interface reads out the reverse gear from the CAN-BUS or K-bus protocol and converts it to an usable analog +12V output signal (maximum 0,04A). With this signal the aftermarket radio- or navigation system switches automatically to the camera input when the car is getting into the reverse gear.
 
Handbrake output
The interface reads out the handbrake signal from the CAN-BUS or K-bus protocol and converts it to an usable analogue output signal.
 
Audio menu recovery
Audio menu recovery for those cars with SEEK buttons shared between radio an body computer (like Mercedes).
 
Phone function
For those cars having Telephone steering Wheel buttons control to answer / refuse any call coming from the atermarket radio hands free Telephone.
 
Parking sensors recovery
Some car models the OEM parking sensors will not work anymore after removing the original radio. The interface recover the OEM parking sensors via an optional buzzer.
 
Amplifier
Some car models the OEM amplifier will be shut down after removing the original radio.The interface recover the OEM CAN-BUS controled amplifier in combination with the aftermarket radio.
 
Original car menu control
To manage car body computer by steering wheel commands in those cars which it can be controlled by the OEM radio.
 
 
The following is provided in the set:
- SW interface
- Installation- and user manual
- Warranty
- Invoice
 

Optional:
- (Plug and play) cable adapter (selectable at the bottom of this page)
- Radio adapter (selectable at the bottom of this page)
- Parking sensor buzzer


Additional information:
- Check at the “compatibility” tab on top of this page if your car model,  radio or navigation system is suitable for this product.
- At this tab you will also find information about the support of steering wheel controls.
- Choose the right optional Radio-adapter (selectable at the bottom of this page)
- Choose the right cable adapter (selectable at the bottom of this page)
-The interface is CE, FCC and TUV certified
 
 
Product specifications:
Voltage: 10 - 16V VDC
Standby consumption: 0,001 A
Decrease in Operating: 0,048 A
Temperature range: - 30°C up to + 80°C
Weight: 42gr
Dimensions: Width 65mm x Height 65mm x Depth 25mm
 
 

Compatibility
The interface is compatible with the following models from VW:
Y = Yes
N = No
 
    1 2 3 4 5 6 7 8 9 10 11 12 13
Beetle 2012-> Y Y Y Y Y Y N Y N Y N Y VW11
Eos 2007-> Y Y Y Y Y Y N Y N N N Y VW11
Golf 2004-2007 Y Y Y Y Y Y N Y N N N Y VW11
Golf Plus 2004-> Y Y Y Y Y Y Y Y N N N Y VW11
Golf VI 2008-> Y Y Y Y Y Y N Y N N N Y VW11
Golf VI 2008-> Y Y Y Y Y Y N Y N N N N  
Multivan 2007-> Y Y Y Y Y Y N Y N N N Y VW11
New Touareg 2007-2009 Y Y Y Y Y Y N Y N N N Y VW11
Passat 2004-2009 Y Y Y Y Y Y Y Y N N N Y VW11
Passat 2010-> Y Y Y Y Y Y N Y N N N Y VW11
Passat CC 2008-> Y Y Y Y Y Y N Y N N N Y VW11
Polo 2009-> Y Y Y Y Y Y N Y N N N Y VW11
Scirocco 2008-2010 Y Y Y Y Y Y Y Y N N N Y VW11
Scirocco 2011-> Y Y Y Y Y Y N Y N N N Y VW11
Sharan 2010-> Y Y Y Y Y Y N Y N N N Y VW11
Tiguan 2007-2010 Y Y Y Y Y Y Y Y N N N Y VW11
Tiguan 2011-> Y Y Y Y Y Y N Y N N N Y VW11
Touareg 2004-2006 Y Y Y Y Y Y N Y N N N Y VW11
Touran 2004-2009 Y Y Y Y Y Y Y Y N N N Y VW11
Touran 2010-> Y Y Y Y Y Y N Y N N N Y VW11
 
1: Steering Wheel compatible
2: Positive ignition output
3: Positive light output
4: Speed signal output
5: Reverse gear output
6: Negative handbrake output
7: Audio menu recovery
8: Phone buttons compatible
9: Parking sensors recovery
10: Ampli wakeup function
11: Car menu control
12: Plug and play adapter available
13: Article plug and play adapter
 
For the complete compatible list see tab "Downloads" or see this link:
 
 
Cable kits
The following cable adapters are available for VVW:
Plug and play cable adapter = CXC-CO-VW11
No cable kit = No cable adapter
Universal cable adapter  = CXC-CO-UN12
Universal cable adapter with IR connector = CXC-CO-UN11
 
 
The cable adapters can be selected at the bottom of this page.
 
 
Radio adapters
To maintain the original steering wheel control you must select the optional radio adapter at the bottom of this page.
 
Below you will find a short overview of the various radio adapters and compatible radio models.
 
CX-ST-JV12
CLARION, JVC, BELSON NAVIX-450, BS3112; MACROM M-DVD5542R, M-DVD5561R, M-DVD5562R ; DIGITAL DYNAMIC DYMAGE-N620; SKYWAY GM-7540 NAVI; AUTOSONIK DAYTONA 8000, INDIANAPOLIS 2600, MONTECARLO 2010, INDIANAPOLIS 6100 Navi ; PHONOCAR VM033, VM037, VM029.                 
 
CX-ST-PI12
PIONEER; SONY*; PHONOCAR VM040*(flashes 5), VM041* (flashes 5), VM024; NAVIS NS-1770 (flashes 5); UNICARS EAGLE3.5, EAGLE2D, EAGLE2DBT, EAGLE2DGPS, EAGLE2DNAV, EAGLE2D62NB (flashes 4); EVUS DD710X (flashes 4); INNOVATE INVM3231 (flashes 4);  CASKA CA1621G (flashes 4); AUTOSONIK SUZUKA 3400, LE MANS 1200, BAHRAIN 1100; KENVOX AFRICA TWIN 1400, RAPTOR 1200, LOW RIDER 1100; DIGITAL DYNAMIC DYMAGE NF630 (flashes 4), DYMAGE M700 (flashes 4); BLAUPUNKT NEW YORK 800 RESISTIVE (max 6 button).
 
CX-ST-AL22
ALPINE
 
CX-ST-KE11
KENWOOD
 
CX-ST-PN21
PANASONIC; PHONOCAR FORYOU, CMU128, CM123, VM020, VM021, DM736, VM016, VM017, VM030, VM031, VM032, VM036, VM050, N6205, VM066; AUTOSONIK DAYTONA 7000; ZENEC ZE-MC194, ZE-MC192, ZE-NC2040, XZENT XT8020, ZE-NC520, ZE-NC524; DIGITAL DYNAMIC DX650D, DX700; HARDSTONE HS DPM61, HS DPM62, HS DPM63, HS DPM31,                HS DPM7G, HS DPM8G, HS DPM71, HS DPM69, HS DPM64; MACROM M-DVD6555R, M-DVD6556R; KENVOX NINJA 7200, NINJA 7200 N; RADIO JEEP; RADIO AUDI A4.
 
CX-ST-BL12
BLAUPUNKT; BLAUPUNKT 2 ATLANTA 110, MADRID 210, TORONTO 410 BT, SAN FRANCISCO 310.
 
CX-ST-VD11
VDO*
 
CX-ST-EL11
ECLIPSE AVN2227P, AVN4429, AVN726EE.
 
 *Special hardware required (via infrared), contact NavInc before the interface will be ordered.
 
For a full radio compatibility list and features, see the following link: 
 
 
Optional cable adapters
To maintain the original parking sensors, the optional buzzer must be ordered:
CXC-ACC-PDC
 
 

Productvideo:

 
Radio compatibility list
 
 
Compatibility list
See link for the complete list: