Heavy duty AHD (1080) camera; Front/Rear/Side; 1280x960 (NTSC)



Find the nearest store or webshop.

Where to buy

Business customer?

Register for exclusive access to our full assortment and pricing.

Product Datasheet

Heavy duty AHD ball camera; Front/Rear/Side; 1920 x 1080 (NTSC) 
- 2M SONY CMOS AHD Color FHD Sensor
- Vibration & impact resistant housing
- All view direction applicable (via rotary key)
- IP69K Waterproof rating
- 160 degrees lens (Wide field of view) 
- NTSC - 30fps 
- WDR (Wide Dynamic Range)
- High End Night View (0.0Lux) with 8* LEDs
- Anti-glare & ghost
- Voltage range (5V-32V)
- Extreme Temp. Durability 
Operating: -30°C ~ 60°C 
Storing Temp. : -40°C ~ 80°C  
- Din metal screwlock connector
- Front/Rear/Side mounting
- CE-mark
- FCC-mark
- 2 Year warranty & Support

Highest Quality lens
2M SONY CMOS AHD Color FHD Sensor 1920 x 1080 (NTSC) 
IR leds
The camera is equipped with 8* IR nightvision leds. 
-Auto ON/OFF by a brightness detecting sensor
-Progreesive Brightness adjustment
-Wider & Longer illuminating range by a patented designed front glass
Mirror & Unmirror switch
The camera is equipped with an mirror & Unmirror magnetic switch
- switch not installed is Unmirror view
- switch installed is mirror view 
Built-in microphone located on the back to minimize the wind noise
Ball rotary
All view direction applicable just by rotating the camera in the ball bracket.
Metal screw lock
Water- & shock proof 4-pins mini din screw lock connector. 
Ignition proof (+15)
It is possible to connect the powersupply to an ignition feed (+15), because we use the highest quality camera.
In this way you are able to watch the camera also in DRIVE gear or via manual selection.  

- We recommend that the installation will be performed by a qualified specialist
- Check also the other tabs for "Compatibility" - "Package contents" - "Product specifications" 

Please check before purchase if it is aloud to install this camera and it wont affect your MOT.


Universal use
Only for rear installation 


- CVBS signal is NTSC


The following is provided in the set:

  1. AHD 1080 camera with metal screwlock connector: 1x
  2. Screw set: 1x
  3. Rubber pad with self-adhensive tape: 1x
  4. Installation instructions: 1x


Voltage supply: 12V
Operation voltage: 12V - 24V
Sensor: 2M 1/3 SONY CMOS AHD  (F2.2)
Resolution:  1280x960 pixels
TV line: 800 TVL
Video output: 1Vp-p,75Ohm
Lens: 160 ° (D) - FOV (Field of View)
Connection: 6-pin metal screw lock
Image: Mirror & Non mirror (magnetic switchs)
TV system: NTSC - 30fps
IR led: Yes - 8*
Night vision: Excellen Nigh view (0 Lux) with LED's
Operating Temperature: -30°C to +60°C
Storing Temperature: -40°C to +80°C
Back Light Compensation: Automatic
Microphone: High Sensistive C-mic
Waterproof: IP69K
WDR (Wide Dynamic Range): Yes
Vibration & impact reistant: Yes
Sizes: 63,6mm x 77mm x 52,8mm (with bracket)
FFC: Yes
CE: Yes
E: E11